RJ45 SFP module is usually useful to connect two switches with copper interface over Cat5e or Cat6 cable. The next will highlight how exactly to install, connect and remove the RJ45 SFP module at length

Installing A RJ45 SFP Module

.1Attach an ESD preventive wrist strap to your wrist and to a bare metal surface

.2Consider away the copper SFP module from the protective packaging

.3Discover the copper SFP markings on the module and align them before the slot opening

.4Insert the copper SFP module in to the slot on the switch before copper SFP module snaps into position

Connecting A Cat5 Cable

.1Insert Cat5 cable into the RJ45 connector of the copper SFP module

.2Make certain the Cat5 cable has been pushed in to the copper SFP module

Removing A RJ45 SFP Module

.1Attach an ESD preventive wrist strap to your wrist and also to a bare metal surface aswell

.2Disconnect the cable in the SFP module

.3Unlock and take away the copper SFP module

.4Put the removed SFP module within the protective packaging or antistatic bag

OEMfibers not merely supplies compatible RJ45 SFP modules which all meet up with the standards or MSA, but also provides reliable 10g/40g modules and patch cables. When you have any needs, please visit OEMfibers.COM